HVAC Contractor

The ultimate guide to furnace maintenance checklist

guide to furnace maintenance checklist

furnace installation sandy ut is a vital task to do. As a household owner, there are some easy steps that you can take to make sure that your new furnace installation barron county wi stays in fine form. The following write-up is all about the furnace maintenance checklist.

Here is a list of things that you need to conduct on your system at least once every year. The lone exemption is air filter replacement that you have to do at least every three months or as required.

1.Clean the flame sensor and burners

The flame sensor and burners should be cleaned often

2.Check heat exchanger and CO detector

Check the heat exchange for any leakages or cracks. Moreover, check your CO detector and change its batteries if required.

3.Clean humidifier

If you are using a humidifier, it needs to be cleaned regularly.

4.Inspect and clean air registers and ductwork

The air registers must be cleaned regularly. Filthy air registers lessen airflow.

5.Lubricate blower and inducer fans

Fans need to revolve liberally and need some oiling.

6.Check thermostat for proper functioning

The thermostat must regulate the furnace appropriately.

Seek the top companies for best furnace services Hinsdale

How to replace the air filter?

The work of the furnace air filter is to filter out dust, filth, and other particles from entering your house’s air. The air filter of your furnace needs to be replaced every three months.

In an ideal world, you will need to change the air filter every 1 or 2 months. Pleated filters generally last a little more but introduce a big pressure fall in the unit, while non-pleated filters just last for about 1 month, but they do not hinder as much airflow. A lot of aged HVAC units that were intended for enormous pressure falls utilize non-pleated filters.

In order to change the air filter, you should first turn off the power button of the furnace. As the furnace entirely shuts down, take out the filter access panel from the ductwork. After that, take out the old filter vigilantly, ensuring that dirt or debris doesn’t drop off the filter or spread at any other place.

Dispose of the old filter and insert a new one into the filter slot. Contact the best furnace services Hinsdale if you need any assistance to replace the filter.

Check out for more information to know what size furnace do I need for my house.